Spectra Logic Spectra 50, Дополнительное руководство

Страница: 13 / 15

13
Spectra 50-Series Library Tape Drive Replacement Guide
5. Reconnect the drive power and
communication cables to the DIB.
The drive power and communication
cables are black cables shrinkwrapped in
green sheathing; they plug in to the top
of the DIB (Figure 23).
Figure 23 The drive communication and power cables plugged into the board.
6. Pinch the tabs on the sides of the fan(s)
and slide the fan(s) gently downward and
into the DBA (Figure 24).
Figure 24 Reinstalling the fans in the library.
7. Reconnect the fan cable(s) to the DIB.
The fan cables are yellow, red, and black,
and they are plugged into the top of the
DIB (Figure 25).
Note that the bottom fan plugs in to the
port labeled Fan 1, and the top fan plugs
in to the port labeled Fan 2.
Figure 25 The fan cables plugged into the board.