Alarm Management
DVR User Manual
46
Button
Meaning
Click to go to the live view interface; see Chapter 5 Live View Introduction for
details.
Click on the playback window to show the tool bar as shown in area ③; right click on the window to show the menu list. The tool bar and menu
list are introduced in the table below.
Button
Menu List
Meaning
--
Move tool. Click it to move the tool bar anywhere.
Enable Audio
Click to enable audio. You can listen to the camera audio by
enabling audio.
Snapshot
Click to take a snapshot.
Zoom In
Click to go to the zoom in interface. The zoom in interface is
similar to that of the camera window in the live view interface.
Click
to pause the record playing; click
to play the
record. When the record is paused in forward playing mode, you
can click
to view the previous frame and click
to
view the next frame.
Add Tag
Click to add tag. You can play back the record by searching the
added tag. Click it and then enter the tag name in the popup
window. Click “Add” to add tag.
Switch Camera
Click to switch the playback camera. Click it and then check the
camera in the popup window. Click “OK” to change the camera.
Close Camera
Click to close the playback camera.
Introduction of area ④:
You can check the recording type as required for record playback; first you should click
on the tool bar at the bottom of the interface to clear
all the playback cameras, then check the recording type (
: manual record;
: sensor based record;
: motion based record;
: schedule
record;
: analytics record; and finally click
in the playback window to add camera for playback (the record time scale will show the record
data of the checked record type only after the above operations).
Introduction of the record time scale (area ⑤):
Click
to set the date; click
to set the time and then the playback camera will play the record from the time you set.
A tool bar will appear after moving the mouse to the record time scale. Click
/
to zoom the timeline; click
to recover the
timeline to 24 hours ratio. Drag the timeline or slide the scroll wheel of the mouse on the time scale to show the hidden time on the top or bottom
of the timeline. You can also click
to show the hidden time on the top of the timeline or click
to show the hidden time on the bottom
of the timeline. Drag the slider at the bottom of the time scale to show the hidden playback cameras.
The record time scale shows different record types with different colors. The green block stands for manual recording, red block stands for
sensor-based recording, yellow block stands for motion based recording, blue block stands for schedule recording and cyan block stands for
intelligence recording. Click the record block to set the time and then the playback camera will play the recording from the time you set.
Drag the color block on the time scale to select the backup area and then right click the area or click
to pop up an export information window.
Click
button in the window to pop up the export window. Select the device, export path and format and then click “Export” button to start
the backup.
Содержание H16HRLN
Страница 49: ...Record Disk Management DVR User Manual 43...
Страница 99: ...FAQ DVR User Manual 93 Fig 11 2...
