Speco H16HRLN, Руководство пользователя

Страница: 51 / 102

Alarm Management
DVR User Manual
45
the playback window to pop up the “Add Camera” window. Check the cameras in the window and then click “Add” to add playback camera. The
system supports a maximum of 16 synchronous playback cameras.
The buttons on the tool bar (area ①) at the bottom of the playback interface are described in the table below.
Button Meaning
Start button. Click to pop up area ②.
Full screen button. Click to show full screen; click it again to exit the full screen.
Screen mode button.
OSD ON button. Click to enable OSD; click again to disable OSD.
Stop button.
Rewind button. Click to play video backward.
Play button. Click to play video forward.
Pause button.
Deceleration button. Click to decrease the playing speed.
Acceleration button. Click to increase the playing speed.
Previous frame button. This works only when the forward playing is paused in single
screen mode.
Next frame button. This works only when the forward playing is paused in single screen
mode.
Click to step backward 30s and click to step forward 30s.
Click to show the water mark on the image; click to hide the water mark.
Event list/tag button. Click to view the event record of manual/schedule/sensor/ motion
and the tag information.
Backup button. Drag the mouse on the time scale to select the time periods and cameras,
and then click the button to back up the record.
Backup status button. Click it to view the backup status.
Back button. Click it to return.
Full screen motion button.
Motion button.
Draw line button. You can search all recordings of crossing this line after it’s drawn.
Draw quadrilateral. You can search all recordings this quadrilateral after it’s drawn.
Smart playback settings. Click to set smart playback.
Introduction of area ②:
Button Meaning
Click to go to record search and export interface; see 8.4 Record Search,
Playback & Backup for details.