Speco H16HRLN, Руководство пользователя

Страница: 23 / 102

Live View Introduction
DVR User Manual
17
4 Camera Management
4.1 Camera Signal
Click Start

Settings

Camera

Manage Camera

Camera Signal to go to the interface as shown below.
Some models may support switching analog signals to IP signals, which means decreasing (or increasing) the number of analog channels will
accordingly increase (or decrease) the number of IP channels.
The DVR supports hybrid access of TVI, and CVBS high-definition cameras. If the TVI high-definition camera is attached to the DVR, you should
select TVI/CVBS in the following interface to show the camera image normally; if you select AHD/CVBS, then there will be no image or the image
will have no color. The default selection of the camera signal is Auto. If you select Auto, the image of the camera will be shown normally regardless
of the camera type.
Audio over Coax: if your analog camera supports coaxial audio transmission, you can select “ON”. For now, coaxial audio transmission is only
available for TVI output.
Note: You can enable “Lite” in the interface if the DVR supports “Lite” recording. It will lower the recording resolution and increase the recording
frame rate. Please enable or disable the Lite function as needed.
4.2 Add/Edit Camera
4.2.1 Add Camera
The network of the DVR should be configured before adding IP cameras (see 12.1.1 TCP/IP Configuration for details).
Refer to the pictures below. Click Add Camera in the setup panel or in the top right corner of the preview window to pop up the “Add
Camera” window as shown below. You can quickly add or add the IP camera manually.