15
14
2.
Safety
This Operation Manual contains basic instructions which must be observed du-
ring mounting, operation and maintenance. Therefore the Operation Manual
should be carefully read before installation and start-up by the person in charge
of the installation as well as by all other technical personnel/operators and
should at all times be available at the installation site.
It is important that not only all general safety measures appearing under the
above heading "Safety” should be adhered to but also all other, specialized sa-
fety instructions appearing under the other headings, e.g. for private use.
2.1
Symbols for Safety Instructions in the Operation Manual
All safety warnings contained in the Operation Manual which, when ignored,
may constitute danger for humans, are specially marked with general danger
symbols:
Safety symbol according to DIN 4844 - W 9
In case of electrical hazards they are specially marked with:
Safety symbol according to DIN 4844 - W 8
For safety warning which, when ignored may constitute a hazard for the machi-
ne and its functions as well as for the surrounding, the word
is added
Symbols directly attached to the machine like e.g.
– arrow denoting the direction of rotation
– symbol for fluid connections
must be heeded and kept fully legible at all times.
!
CAUTION
Technical data at 50 Hz
BADU
Picco 5
Inlet, nozzle
∆
)
Ø 38
Outlet, nozzle *)
Ø 38 (Ø 32)
Recommended inlet/outlet pipe, hose
1
1
/
2
”/ 1
1
/
2
” (1
1
/
4
”)
Power input P
1
(kW)
1~230 V
0,35
Power output P
2
(kW)
1~230 V
0,20
Rated current (A)
1~230 V
1,95
Weight (kg)
5,5
Type of motor enclosure
IP X4
Thermal class
F
Motor speed approx. (rpm)
2840
Continuous sound intensity level dB (A)
≤
70
1)
Max. water temperature (°C)
60
Max. casing interior pressure (bar)
2,5
For standard voltage according to IEC 38 and
DIN EN 60034 (Euro-voltage).
Suitable for continuous operation at 1~220-240 V.
Tolerances ± 5 %.
GS-tested pumps according to EN 60335-1.
1)
Measured with a phonometer according to DIN 45635
.
Characteristics BADU Picco
applicable for water of 20°C
KL 90.40.401
Total dynamic head H (m)
Flow rate Q (m
3
/h)
*)
Special screw fitting with hose nozzle for 1
1
/
4
˝
and 1
1
/
2
˝
hose respectively, included.
∆
)
Transparent lid (160.1) also available with hose nozzle Ø 32.
