Car Seat Installation
Lap Belt & Tether Installation - Continued
Figure 49.
Figure 50.
Figure 52.
Lap Belt & Tether Removal
Figure 51.
a b c d
Figure 54.
To remove the restraint, depress the red release button on the Lap Strap buckle. Release the
top Tether anchor to completely detach the restraint from the vehicle.
Special Tomato
TM
Multi-Positioning Seat - SMALL: User’s Guide 21
1) Verify that your MPS has the Tether Strap attached correctly. If not, follow steps 2 - 5 below before
continuing with the installation.
2) Face MPS Seat Back to you. Thread loop end of Tether Strap through first Tether Strap slot.
Figure
49
.
3) Thread loop end of Tether Strap through second Tether Strap slot.
Figure 49.
4) Thread Tether hook through loop end of Tether Strap.
Figure 50
.
5) Pull hook end of Tether Strap taut.
Figure 51.
6) Now that the Tether Strap is attached correctly, verify that the LATCH belt is secured and tight.
7) Hook the Tether hook to the vehicle anchor and tighten belt.
Figure 52
.
8) If your vehicle does NOT have a Tether anchor, install the Tether Anchor with the hardware provided
in this order:
Figure 54. - a)
3/8” bolt,
b)
Tether Anchor,
d)
Large Washer, and
e)
Nut.
Please Note:
The vehicle body goes between the Tether Anchor and the Large Washer with the Large
Washer directly underneath the vehicle body.
Please Note:
Please contact your vehicle manufacturer to determine the best place to install the Tether
Anchor in your vehicle.
