Special Tomato™ Multi-Positioning Seat - SMALL: User’s Guide 5
Setting Up Your MPS
Unpack
Check to see that the following items are included
with your Multi-Positioning Seat (MPS):
· Seat Shell
· Head Cushion installed
· Headrest Tether Strap
· Back Cushion installed
· Seat Cushion (Regular or Extended size) installed
· Two Safety Attachment Straps installed
· Five Point Harness System installed
· Top Tether Strap
· Left and Right Leg Rest Extensions
· 2 Leg Rest GROOVED Knobs (1 3/16”)
· 2 Footrest BALL Knobs (1 1/2”)
· Footrest with 2 Foot Straps
First attach the MPS to the appropriate base of choice
with the Attachment Straps:
Assembly
Figure 1.
Figure 2a.
Figure 3.
Figure 2b.
Mobile Floor Base
- Secure tightly the Rear Strap
under lip of Mobile Floor Base
- Secure tightly the Bottom Strap
under Mobile Floor Base
between both sets of wheels
Figure 1.
Standard Chair
- Secure tightly the Rear Strap around
back of chair (spiral method below or
straight method in
Figure 1.
)
- Secure tightly the Bottom Strap un-
der seat of chair
Figure 3
.
- Note:
Make sure the chair is stable!
Push Chair Base
- Secure tightly the Rear
Strap around back of Push
Chair Base, between the fab-
ric and the cross bars
Figure 2a.
- Secure tightly the Strap
under Push Chair Base un-
der the seat making sure to
thread between the seat back
frame and the front leg frame
Figure 2b.
}
When purchased as a
Car Seat only, these
items not included
standard
