Car Seat Installation
Lap Belt & Tether Installation
Figure 45a.
Figure 45b.
Figure 46.
Figure 47.
Figure 48.
20
Special Tomato
TM
Multi-Positioning Seat - SMALL: User’s Guide
1) Identify your vehicle’s Lap Belt.
Figure 45a
.
2) Verify that your vehicle is equipped with a Tether anchor. Refer to Steps 1 -5 on Page 21.
3) Verify that the 5-Point Harness is secured. See Page 22 for details.
4) Install the MPS with the Lap Belt & top Tether Strap.
Figure 45b
.
5) Thread the Lap Belt from the front to the back through the slot in the seat shell located between the
seat and back cushions.
Figure 46
.
6) Thread the Lap Belt across the back of the seat shell.
7) Thread the Lap Belt from the back to the front through the opposite slot in the seat shell located
between the seat and back cushions.
Figure 47
.
8) Buckle the Lap Belt, making sure
you hear an audible “Click”.
Figure 48
.
9) Place your knee in the MPS,
bearing weight on the seat, to
make it fit snuggly to your vehicle.
Pull tightly until slack is removed
from Lap Belt.
***SEE NEXT PAGE TO COMPLETE INSTALLATION PROCESS!***
Installation Method
SMALL MPS
LARGE MPS
LATCH Belt & Tether
20 - 50 lbs. (9 - 22 kg) Not Applicable
Lap Belt & Tether
20 - 80 lbs. (9 - 36
kg)*
80 - 150 lbs. (36 - 68
kg)
Lap/Shoulder Belt &
Tether
20 - 80 lbs. (9 - 36
kg)*
80 - 150 lbs. (36 - 69
kg)
* Use these methods for children between 20 - 48 lbs. if your vehicle is not equipped with the LATCH
mechanism.