Car Seat Installation
Lap/Shoulder Belt & Tether Installation
Figure 34a.
Figure 36.
Figure 34b.
Figure 35.
Figure 37.
Figure 38.
18
Special Tomato
TM
Multi-Positioning Seat - SMALL: User’s Guide
1) Identify your vehicle’s Lap/Shoulder Belt.
Figure 34a
.
2) Verify that your vehicle is equipped with a Tether anchor. Refer to Steps 1 -5 on Page 19.
3) Verify that the 5-Point Harness is secured. See Page 22 for details.
4) Install the MPS with the Lap/Shoulder Belt & top Tether Strap.
Figure 34b
.
5) Thread the Lap/Shoulder Belt from the front to the back through the slot in the seat shell located
between the seat and back cushions.
Figure 35
.
6) Thread the Lap/Shoulder Belt across the back of the seat shell.
7) Thread the Lap/Shoulder Belt from the back to the front through the opposite slot in the seat shell
located between the seat and back cushions.
Figure 36.
8) Buckle the Lap/Shoulder Belt, making
sure you hear an audible “Click”.
Figure 37
.
9) Place your knee in the MPS, bearing
weight on the seat, to make it fit snuggly
to your vehicle. Pull tightly until slack is
removed from Lap/Shoulder Belt.
Figure 38.
***SEE NEXT PAGE TO COMPLETE INSTALLATION PROCESS!***
Installation Method
SMALL MPS
LARGE MPS
LATCH Belt & Tether
20 - 50 lbs. (9 - 22 kg) Not Applicable
Lap Belt & Tether
20 - 80 lbs. (9 - 36
kg)*
80 - 150 lbs. (36 - 68
kg)
Lap/Shoulder Belt &
Tether
20 - 80 lbs. (9 - 36
kg)*
80 - 150 lbs. (36 - 69
kg)
* Use these methods for children between 20 - 48 lbs. if your vehicle is not equipped with the LATCH
mechanism.