Car Seat Installation
LATCH Belt & Tether Installation - Continued
Figure 28.
Figure 31.
Figure 29.
Figure 32.
LATCH Belt & Tether Removal
Figure 30.
a b c d
Figure 33.
To remove the restraint, depress both red release buttons on the LATCH buckles. Release the
top Tether anchor to completely detach the restraint from the vehicle.
Special Tomato
TM
Multi-Positioning Seat - SMALL: User’s Guide 17
1) Verify that your MPS has the Tether Strap attached correctly. If not, follow steps 2 - 5 below before
continuing with the installation.
2) Face MPS Seat Back to you. Thread loop end of Tether Strap through first Tether Strap slot.
Figure
28
.
3) Thread loop end of Tether Strap through second Tether Strap slot.
Figure 29
.
4) Thread Tether hook through loop end of Tether Strap.
Figure 30
.
5) Pull hook end of Tether Strap taut.
Figure 31
.
6) Now that the Tether Strap is attached correctly, verify that the LATCH belt is secured and tight.
7) Hook the Tether hook to the vehicle anchor and tighten belt.
Figure 32
.
8) If your vehicle does NOT have a Tether anchor, install the Tether Anchor with the hardware provided
in this order:
Figure 33. - a
) 3/8” bolt,
b)
Tether Anchor,
d)
Large Washer, and
e)
Nut.
Please Note
: The vehicle body goes between the Tether Anchor and the Large Washer with the Large
Washer directly underneath the vehicle body.
Please Note
: Please contact your vehicle manufacturer to determine the best place to install the Tether
Anchor in your vehicle.
