Spartherm Mellino, Инструкция по установке и обслуживанию

Страница: 26 / 28

GB 26
Error code Meaning / remedy
E110 Off Off On NTC1 defective (room temperature sensor)
E111 Off Off On K-type sensor 1 defective (flue gas temperature sensor)
E112 Off Off On Overtemperature deactivation
E115 Off Off On General error
10.3 SHIFTING FROM MODULATION / STANDBY
For shifting from operating mode Modulation to operating mode Standby
(see operating instruction, chapter 2.6), proceed as follows
• Scroll through the service menu with the menu keys (the gear wheel
symbol to the right)
• Go to level 7 in the service menu using the + / - setting keys,
[ r - - 0 ] appears
• Press Enter, a random number appears
• Calculate the checksum of this random number and add 1
• Press Enter and set the number calculated using th + / - setting keys
• Press Enter to confirm, ON appears
• Go to level 8 in the service menu using the + / - setting keys,
[ P A r ] appears
• Press Enter, [ P 0 0 0 ] appears. That is the parameter no. 000.
• Use the menu keys to go to parameter P053.
• Press Enter and the current setting value of the parameter appears
flashing
• Use the setting keys + / -, set the value to 0 for Modulation or 20 for
Standby
• To confirm, press Enter
• Press the ESC key at the top left 3 times to return to the home position
10.2 ERROR CODE LIST
Here is a list of the error codes (see chapter 6, level 13). If an error is
reported, determine and eliminate the cause. The errors can be reset by
pressing the On / Off key. The stove can only be restarted after that. If the
error cannot be reset, contact customer services.
Error code Meaning / remedy
(none) On Off Off
Overtemperature deactivation due to an empty tank.
Top up and fill the feeder spiral.
A001 Flashing Off Off Pellet deficiency (is not activated!)
(none) Off On Off
Burner pot or chimney blocked. Clean. Or the combus-
tion chamber door has been opened during operation.
Close the door.
A002 Off Flashing Flashing Have a service carried out (is not activated!)
A003 Off Flashing Off Burner pot or chimney blocked. Clean.
A004 Off Off Flashing Weak controller battery. Contact customer service.
A005 Off Off Flashing
Speed signal from the flue gas fan is faulty (is not
activated!)
A006 Flashing Flashing Flashing
Combustion chamber door open (only with door contact
switches, is not activated!)
A007 Off Off Flashing Controller pressure sensor defective
E001 Off Off On Display error or display defective
E002 Off Off On Infrared communication disturbed
E003 Off Off On Remote control data flow defective
E004 Off Off On Controller data flow defective
E101 Off Off On Combustion error, e.g., misfire
E105 Off Off On NTC2 defective (not active!)
E106 Off Off On NTC3 defective (not active!)
E107 Off Off On K type sensor 2 defective (inactive!)
E108 Off Off On STB defective or tripped
E109 Off Off On Pressure switch defective (inactive!)