Spartherm Mellino, Инструкция по установке и обслуживанию

Страница: 11 / 28

GB 11
GB
10
Room temperature and target temperature in °C
11
Pellet type selection (1, 2 or 3)
12
Time and time switch program
13
Service menu
14
Setting key (Jump back)
15
16
Enter key
17
Menu keys
18
19
Status lamp
5.2 THE REMOTE CONTROL
The most important settings of the stove can also be carried out using the
infrared remote control supplied.
To control the stove using the remote control, you need a free view of the
stove display. The receiver is located in the top section of the display. The
commands of the remote control are shown in the display.
For changing the battery, first pull the stop hook to the middle and hold t
there and then pull out the battery compartment, as shown on the back of
the remote control. Battery type: button cell CR2032, 3 Volt.
6. SERVICE MENU
The service menu is sub-divided into 13 levels. The level is displayed as a
value in square brackets, e.g., [ 5 ]. Levels 1 to 6 are freely accessible,
level 7 contains a password request for activating the levels 8 - 13.
Level Function
1
Keypad lock (OFF, Lo or Hi)
2
Display background brightness (1 to 5)
3
Display indicator idling (1, 2, 3 and OFF)
4
Volume of the signal transmitter (1 to 5)
5
Software version of display (d…) and control system (c…)
6
Manual continuous running of the screw feeder
(key function)
7
Password query (r--0) for activation of higher levels
9
Parameters, can be called up and edited
9
Status display of all digital inputs
10
Status display of all analogue inputs
11
Status display of all digital outputs
12
Counter for different events, e.g., operating hours
13
Recording of different events, e.g., error messages
On/Off switch
(key 1)
Heating capacity higher
(Key 2)
Nominal room temperature
higher (Key 4)
Heating capacity lower
(Key 3)
…lower (Key 5)