Spartherm Mellino, Инструкция по установке и обслуживанию

Страница: 16 / 28

GB 16
7.1 REAR WALL
The rear wall is in two parts. The top part can be hung-out by lifting it. Then
the bottom part can also be removed by lifting it.
Proceed as follows for reading out:
• Go to level 13 in the service menu using the + / - setting keys, [ L O
G S ] appears
• Press Enter, [ L 0 0 0 ] appears. That is the newest error recorded last.
• Use the menu keys to go to the desired error buffer.
• Press Enter, first the year value of the error recording appears
• Using the right menu key, you can scroll to the following data: date, time
and the three digit error code
• Press the ESC key at the top left 3 times to return to the home position
A table with the error codes can be found at the end of the service
instructions.
7. MECHANICAL COMPONENTS
The pellet stove Mellino is supplied ready mounted. The cladding does not
have to be assembled on location.
If it should be necessary to remove parts of the cladding, the following notes
must be observed:
• Opening the cladding or the replacement of parts on the Mellino must
only be carried out by an instructed specialist.
• Disconnect the power plug from the socket before opening the cladding
each time!
• The cladding must only be removed when the stove is switched off and
has cooled down.
• Take care that the pellet supply tank is close so that no tools can fall
into it.