17
Click!
Start-Up Guide
MOUNTING THE CONTROL BOX
1
2
3
4
1 . Lift box at an angle above the mounting plate .
2 . Align the base of the handle and clip over the plate .
3 . Lower box against the handle .
4 . Check the box is central to the frame .
NOTE:
To remove the box, disconnect the cables and repeat the steps above in reverse .
PLUG / SOCKET ENGAGEMENT
7 pin-din:
• Align the keyway clip at 12 o'clock with the socket
• Push connector into the socket until you hear the click of it locating
NOTE:
Please ensure all connectors are clean and dry before connection .
Do not twist.
