Spacelabs Healthcare 90217A, Руководство по эксплуатации

Страница: 9 / 46

1-3
070-2177-01 Rev B
Power the monitor ON. Check that the LCD display is ON. If there is no display, power the
monitor OFF and review the problem-solving checklist in Section 4. Troubleshooting.
Please ensure that discharged batteries, of all types, are disposed of in
accordance with local regulations.
1.3 Initializing the Monitor
The ABP monitors must be initialized prior to the start of patient monitoring. Initialization
specifies the monitoring period, patient information, time format, measurement interval,
monitor tone ON/OFF during selected periods, event code display, and whether or not to
display pressure values. To initialize the monitor, connect it to one of the following analysis
systems.
1.3.1 Connecting Directly to a Local Report Generator
For a direct connection, place the 90217A monitor into the chute on the Report Generator
(Model 90239A), See Fig. 1-1.
Figure 1-1: Report Generator