Spacelabs Healthcare 90217A, Руководство по эксплуатации

Страница: 19 / 46

1-13
070-2177-01 Rev B
• Use only recommended cleaning solutions, or you may void the
manufacturers warranty.
• Harsh chemical agents degrade plastics and will compromise the safety of
the device.
• Before cleaning the monitor or cuff, disconnect from the patient.
• Do not allow liquid to enter the interior of the equipment.
• Do not immerse the equipment or cables in water or cleaning solutions.
• Do not autoclave - this unit CANNOT be sterilized.
To clean the exterior of monitors, modules, and cables:
• Prepare the cleaning solution according to the manufacturer’s instructions.
• Wet a clean cloth with the selected cleaning solution.
• Remove excess liquid from the cloth and squeeze dry.
• Wipe exposed surfaces of the equipment and cables.
• Remove any soap residue by gently wiping with a clean damp cloth.
• Wipe dry with a clean dry cloth.
Use only the following recommended cleaning solutions:
• Mild soap and water solution.
• U.S. Pharmacopoeia (USP) green soap.
• Sodium hypochlorite solution (1:10 dilution of household chlorine bleach in
water).
• Phenolic germicidal detergent (1% aqueous solution).
• Glutaraldehyde (2.4%) (Cidex or equivalent).
• Isopropyl alcohol (70% solution).
Note: Over time, repeated use of a chlorine bleach solution may cause some
colors to fade.
Tape adhesive can be removed with Spacelabs Healthcare adhesive tape remover pads (P/N
392196-001).
Questions and concerns about cleaning issues should be directed to a Spacelabs Healthcare
field service engineer.
1.6.1 Cleaning the Cuff and Carrying Pouch
Small soiled or stained areas may be cleaned by gentle scrubbing with a sponge or cloth
soaked in a mild soap and water solution.
The cuff wrap (with the air bladder removed) and the pouch are machine washable on