southpaw enterprises In-FUN-ity Climbing System, Инструкция

Страница: 18 / 23

southpaw enterprises, inc.
®
Instruction Sheet
In-Fun-ity Expansion Kit Right Angle Connector 152015
Store these instructions along with the enclosed maintenance checklist
in a safe place. You may also access them on our website.
Take time to familiarize yourself with the use and maintenance of this equipment before using. Please file
this Instruction Sheet in an accessible location: the Instruction Sheet must be read and familiar to anyone
who is using Southpaw Enterprises Equipment.
IMPORTANT: Please check equipment immediately for any damage that may have resulted during shipping.
If any damage has occurred, please contact Southpaw Enterprises, Inc. immediately.
MATERIALS LIST:
2 - Connector Hooks
4 - 3/8-16 x 1-1/2” Socket Head Cap Screws
4 - 3/8” Flat Washers
1 - 7/32” Hex Key Wrench
1 - Instruction Sheet
1 - Maintenance Checklist
NOTE: This item is intended for use if you already have the
Southpaw In-FUN-ity Wall Ladder with the Expansion Kit #
152013 or Jungle Gym Extender # 152014. The hooks will
allow you to attach an extender kit to your system out at a right
angle to the existing structure.
The In-FUN-ity Climbing System is a modular system. Each instruction sheet is designed to assist you in assembling the
particular item that it accompanies. Since these items may be configured in various manners to best suit your applica-
tion, the instructions do not suggest any particular order of assembly. If you have any questions about how to set up
your system, please contact Southpaw customer service for help.
ASSEMBLY:
•
Assemble the Extender Kit following the instructions provided. Attach the Right Angle Connectors to the end of the
horizontal section opposite the ladder.
•
Put a 3/8” flat washer on each of the 3/8” x 1-1/2” cap screws. Put a screw through the hole in the connector and
start it into the screw insert from the inside of the of the horizontal section as shown above. Start all four screws then
tighten securely using the hex key wrench provided.
•
Attach the Extender Kit as shown above.
MAINTENANCE CHECKLIST:
All of the following wear points should be checked on a monthly basis and recorded on the checklist enclosed.
•
Check that all screws and bolts are tight. If any screws or bolts are found to be loose, discontinue use until they are
tightened.
•
Check wood surfaces for cracks and splinters. If cracks are found, discontinue use immediately and contact South-
paw Enterprises. Splinters may be sanded smooth and refinished with clear lacquer.
MATTING PRECAUTIONS:
•
Always use appropriate matting under and around equipment.
STORAGE PROCEDURE:
•
Make sure that equipment is not accessible by clients without proper supervision.
TM