Southern Cross JCD-900 Series, Инструкция по эксплуатации

Страница: 24 / 39

LGCY Series Page 22
1. Indicator
a) Battery Charger: Indicates that the battery is not being charged by the engine.
b) Preheating : Indicates the engine warm state) Running: When the engine running instructions.
c) Alarm: When an alarm signal light.
d) Air pres. Alert: Indicates the discharge pressure exceeds the pressure limit, an alarm signal.
e) Oil filter alert: Indicates the oil filters exceed pressure differential limits.
2. Button
a) Menu / set: Press to enter or exit the setting parameters of state, or confirm the input parameters,
see parameter description.
b) Shift/eliminate: In the parameter setting mode this button, shift, set different parameters. In the
normal interface, this button can be eliminated.
c) Alter / timer: In the parameter setting interface of this button to change parameters in the normal
interface, click here to display the compressor run hours.
d) Stop/preheat: warm-knob switch, L-shutdown,
e) Start: Start the engine, when not start, make sure if there is an alarm or use more than "use of
time".
f) On/off: Power key switch, rotate the power connected to the air compressor