South Bend Tools SB1123 Скачать руководство пользователя страница 7

Страница: 7 / 88

South Bend Tools

For Machines Mfd. Since 7/21

Model SB1123

-5-

I N T R O D U C T I O N

R. Blade Tension Scale:

Displays blade tension

using numbers 0–38. For reference purposes

only—after you have found the proper

tension for the blade installed.

S. Blade Tension Handwheel:

Increases/

decreases blade tension (refer to Page 27).

Blade Tension & Tracking

Blade Tracking Window:

Allows monitoring/

adjustment of blade tracking without

requiring wheel cover to be open (refer to

Page 22).

Tracking Control Lock Lever:

Secures position

of blade tracking control knob.

V. Blade Tension Quick-Release Lever:

Quickly

releases blade tension to speed up blade

changes and prevent unnecessary stretching

of blade and wear on saw components when

not in use. Move clockwise to release blade

tension; move counterclockwise to tension

blade; and position downward to partially

tension blade when tracking. To prolong life

of blade, always release blade tension when

saw is not in use.

W. Tracking Control Knob:

Adjusts tilt position

of upper wheel to set/control blade tracking

(refer to Page 22).

Like all machinery there is potential danger

when operating this machine. Accidents are

frequently caused by lack of familiarity or

failure to pay attention. Use this machine with

respect and caution to decrease the risk of

operator injury. If normal safety precautions are

overlooked or ignored, serious personal injury

may occur.

No list of safety guidelines can be complete.

Every shop environment is different. Always

consider safety first, as it applies to your indi-

vidual working conditions. Use this and other

machinery with caution and respect. Failure to

do so may result in serious personal injury or

property damage.

Figure 7. Tension scale and blade tension handwheel.

Tension scale and blade tension handwheel.

Figure 8. Tracking window, blade tracking controls,

Tracking window, blade tracking controls,

and blade tension quick-release lever.

Содержание SB1123

























































































Результаты поиска

Содержание SB1123

Отзывы:

Похожие инструкции для SB1123

Бренды по названию

Популярные бренды

South Bend Tools SB1123, Руководство пользователя

Результаты поиска

Содержание SB1123

Отзывы:

Похожие инструкции для SB1123

Бренды по названию

Популярные бренды