South Bend Tools SB1123, Руководство пользователя, Страница: 5 / 88

South Bend Tools
For Machines Mfd. Since 7/21 Model SB1123
-3-
I N T R O D U C T I O N
Description of Controls
& Components
Refer to Figures 1–8 and the following
descriptions to become familiar with the basic
controls and components used to operate this
machine.
Control Panel
A. Master Power Key Switch:
Turns incoming
power ON and OFF. Requires key.
B. ON Button: Turns motor ON when pressed.
C. OFF Button: Turns motor OFF when
pressed. Motor will not start until switch is
reset. Twist clockwise to reset.
Figure 1. Control panel. Control panel.
A A
B B
C C
To reduce the risk of
serious injury when using
this machine, read and
understand this entire
manual before beginning any
operations.
Guide Post
D. Guide Post Handwheel: Adjusts height of
guide post above workpiece, using a rack-
and-pinion system.
E. Guide Post w/Scale: Houses upper blade
guides and support bearing, and shields
operator from upper portion of blade. Adjusts
up or down as necessary to position upper
blade guides/support bearing as close as
possible to workpiece for maximum cutting
accuracy and minimum blade exposure to
operator. Scale on side of guide post indicates
height of upper blade guide above table.
F. Upper Blade Guide & Support Bearing:
Supports blade above workpiece during
operations.
G. Guide Post Lock Knob: Secures guide post
position after adjustment.
Figure 2. Guide post controls. Guide post controls.
D D
G G
E E
F F