South Bend Tools SB1123, Руководство пользователя

Страница: 63 / 88

South Bend Tools
For Machines Mfd. Since 7/21 Model SB1123
-61-
S E R V I C E
— If there is no gap between square and
guide post along its full length, no
adjustments need to be made. Proceed to
next procedure.
— If there is a gap between square and the
guide post, guide post is not parallel to
blade. Proceed to Step 4.
4. Loosen guide post lock knob and each of the
four screws shown in Figure 96
1
⁄
4
-turn.
5. Gently tap lower part of guide post in
appropriate direction until there is no gap
between square and guide post.
6. Tighten lock knob and screws loosened in
Step 4.
Checking/Adjusting Guide Post
Parallel with Blade Front to Back
1. DISCONNECT MACHINE FROM POWER!
2. Loosen guide post lock knob, lower blade
guide assembly all the way down, then
tighten lock knob.
3. Remove (2) cap screws and flat washers that
secure guide post guard, then move it up and
out of the way (see Figures 97–98).
Figure 98. Example of guide post guard removed. Example of guide post guard removed.
Guide Post Guide Post
Blade Blade
Figure Figure 96. Guide post lock knob and adjustment . Guide post lock knob and adjustment
screws. screws.
Guide Post Guide Post
Lock Knob Lock Knob
Figure 97. Location of screws and flat washers that Location of screws and flat washers that
secure guide post guard. secure guide post guard.
!
x 2