South Bend Tools SB1123, Руководство пользователя

Страница: 45 / 88

South Bend Tools
For Machines Mfd. Since 7/21 Model SB1123
-43-
O P E R A T I O N
Changing Blade
4. Open upper and lower wheel covers and,
with gloved hands, slide blade off of both
wheels.
5. Slide it through slot in table to remove it.
Removing Blade
1. DISCONNECT MACHINE FROM POWER!
2. Release blade tension by rotating blade
tension quick-release lever (see Figure 59)
clockwise to RELEASE position.
3. Remove table insert and table pin (see
Figure 59). Adjust upper and lower guide
bearings as far away as possible from blade.
LACERATION HAZARD!
Bandsaw blades are sharp
and difficult to handle. Wear
heavy leather gloves while
handling to reduce the risk
of being cut.
Disconnect bandsaw from
power BEFORE changing
blade. Serious personal
injury could occur if machine
is started during this
procedure.
Figure 59. Blade changing controls (table pin hidden Blade changing controls (table pin hidden
behind miter gauge). behind miter gauge).
Guide Post Guide Post
Rotate Rotate
Lever Lever
Clockwise Clockwise
to Release to Release
Position Position
Table Insert Table Insert
Upper Guide Upper Guide
Bearings Bearings
Table Table
Pin Pin
Tools Needed Qty
Hex Wrench 6mm .................................................1
Wrench or Socket 10mm .......................................1
Blade changes entail removing the existing
blade, installing the new blade, then properly
adjusting the blade tension, tracking, and guides.
!