ST2523 Series Operation Manual Ver1.2
57
For example: :TRACe:BM 5.1600E+01,1.0000E+01
Query syntax: :TRACe:BM?
Response: <max value NR3>, <min value NR3>
The :TRACe:ASTOP1 OFF
<value>
:TRACe:ASTOP2 OFF
<value>
:TRACe:BSTOP1 OFF
<value>
:TRACe:BSTOP2 OFF
<value> commands are used to set or return the stop point of trace scanning.
Command syntax:
:TRACe:ASTOP1 OFF Turn off the judging function of this stop point.
:TRACe:ASTOP1 <value> Set the value of the stop point as value.
Query syntax::TRACe:ASTOP1?
Response: OFF or <value NR3>
The :TRACe:SCAN STARt (valid only in TRACE DISP page)
STOP command is used to start or stop trace scanning or to return the current state of trace
scanning.
Command syntax:
:TRACe:SCAN STARt
:TRACe:SCAN STOP
Query syntax:
:TRACe:SCAN?
Response: STAR or STOP (STAR means the instrument is in the trace scanning mode while STOP means out of
the trace scanning mode.)
7.1.10
SYSTem Subsystem Commands
System subsystem commands are used for system setup.
Command Tree:
:SYSTem:BEEP OFF(0)
ON (1)
