ST2523 Series Operation Manual Ver1.2
25
will not be liable for the data loss.
4. In order to rapidly save the instrument data to a U disk, it is not recommended to store too many files or
folders.
Operation Procedures
Press
FILE
and select
INTER File
to enter into the internal file page, as shown in below figure 4-3.
Press [INTER File] and [EXTER File] to respectively display files stored in the internal FLASH and the
external U disk. Press [Exit] to exit the file page.
Figure 4-3 Internal file page
6 files’ information will be displayed in each internal file page or external file page, including file names and
time of being saved.
Operations of the internal file and the external file are similar. Take internal file operations as an example to
describe the specific procedures of file operations.
Operations on file are as follows:
Move the cursor to the file name to be edited, the following items will be displayed in soft key area.
Load
Press
Load
, if the file name that the cursor locates is not empty, [YES] and [NO] will be displayed in
the soft key zone. When [YES] is selected, the instrument will load the setup data in the file; when
[NO] is selected, the current operation will be cancelled.
Copy to E
:
Press “Copy to E”. The instrument will copy the file the cursor locates or the selected file to a U disk.
Delete
Press “Delete”, if “YES” is selected, the instrument will delete the file that the cursor locates.
