ST2523 Series Operation Manual Ver1.2
13
3.3
<TRACE DISP>
Press
TRACE DISP
in soft key area to enter into <
TRACE DISP
>. Touch TOOL, the following page will be
displayed.
Figure 3-4: Trace Display Page
Move to TOOL, the following items will be displayed in the soft key zone:
SCAN START: Press [SCAN START], trace scanning will start; when [SCAN STOP] is displayed and
press it, trace scanning will stop.
TRACE A+B: Press this key, A+B, A, B will be alternately displayed. A indicates that the primary
parameter trace will be displayed; B, secondary parameter trace will be displayed; A+B, traces of
primary and secondary parameters will be displayed simultaneously.
CURSOR: Press this key, the measurement result will be displayed. Touch the screen or press arrow
keys to move cursor.
Max-Min ON: Press [Max-Min ON], maximum and minimum values of primary and secondary
parameters will be displayed after trace scanning. When [Max-Min OFF] is displayed, this function
will be disabled.
