Sound Devices MixPre-6M Скачать руководство пользователя страница 64

Страница: 64 / 80

User Guide

and are therefore disabled on the MixPre. Depending on the controller model,
these functions may include faders, trims, pans, reverb sends, and low cut filters.

Map User-Definable Buttons to Shortcuts

You can customize designated buttons/knobs on a controller to operate certain

functions on the MixPre. Functions that may be assigned include:

• Tone

• L/R Mute

• X1/X2 Mute

• Undo (Audio project only)

• Slate Mic (Audio project only)

• Metronome (Music project only)

• Add Q

• Record

• Stop

• Play

• Rewind

• Fast Fwd

• Shuttle (not all controllers)

To map controller buttons to perform MixPre functions:

1. Connect a controller.

2. On the MixPre, access Menu > * Shortcuts > Control Surface
3. Set any of the user-definable shortcut buttons to your required function.

Controller Interfaces

Each third-party controller has different capabilities. The following tables

Akai MidiMix Interface

Korg NanoKontrol 2 Interface

Korg NanoKontrol Studio Interface

Novation LaunchControl XL Interface

describe the functionality of each controller in Music and Audio projects:

The MixPre M-Series models do not support Audio projects.

Содержание MixPre-6M

















































































Результаты поиска

Содержание MixPre-6M

Отзывы:

Sound Devices MixPre-6M, Руководство пользователя, Страница: 64 / 80

Результаты поиска

Содержание MixPre-6M

Отзывы: