Sound Devices MixPre-6M Скачать руководство пользователя страница 11

Страница: 11 / 80

Powering

Flexible Powering Options

In designing the MixPre-6M, we felt that it was important for it to be able to

operate in a wide array of applications and environments. To support that goal,

power can be supplied from several possible sources:

• Four AA NiMH rechargeable or Lithium primary batteries installed in the

provided 4-AA battery sled, called MX-4AA (included).

• Eight AA NiMH rechargeable or Lithium primary batteries installed in the

provided 8-AA battery sled, called MX-8AA.

• One or two Sony-type L-mount batteries installed in the optional L-mount

battery sled accessory, called MX-LMount.

• USB-C to USB-C cable connected to a USB-C host computer or AC wall

adapter.

• USB-A to USB-C cable connected to a USB-A host computer or AC wall

adapter.

• Dual USB-A to USB-C cable connected to a USB-A host computer.Use this

cable option if your computer is unable to provide adequate power for the

MixPre with only one USB-A port.

• MX-PSU AC wall adapter (included) to USB-C power supply.

Batteries not included.

The power switch is located in the upper right corner of the left side panel.

Power Switch

Содержание MixPre-6M

















































































Результаты поиска

Содержание MixPre-6M

Отзывы:

Sound Devices MixPre-6M, Руководство пользователя, Страница: 11 / 80

Результаты поиска

Содержание MixPre-6M

Отзывы: