Sound Devices MixPre-6M, Руководство пользователя, Страница: 25 / 80

25
INPUT CHANNELS
Using Reverb
Reverb sets how much reverb is added to a track in the LR mix. Only the mix is
affected, not the individual recorded tracks.
To render the reverb effect into the individual recorded tracks, you must use the
Bounce feature.
L
Reverb is unavailable when recording at 96kHz sample rate.
To adjust reverb:
X
From the Channel screen, tap Reverb and turn encoder. Range is Off, -50dB
to 0 dB in 1 dB increments.
You can also select different reverb characteristics—such as type, decay,
predelay, etc.
To configure Reverb:
1. Tap .
2. Page through submenu and tap Reverb.
3. Tap any of the following settings and adjust values accordingly:
s
ettINg
o
ptIoNs
Reverb Type Off, Plate, Hall, Room
Reverb Decay 0.1 - 5.0 seconds
Reverb Pre-Delay 0 - 40 ms
Reverb HF Damp Off, 0-20
Rendering a Vocal Air Effect
Applying Air to a lead vocal can help it stand out in a mix. It adds a desirable
‘airy’ sheen to vocals.
Vocal Air sets how much “Air” is added to a track in the LR mix. The range is
Off, 1%-100%. Only the mix is affected, not the individual recorded tracks.
To render the Air effect into the individual recorded tracks, you must use the
Bounce feature.
L
Air can only be applied to one track at a time. If you want to apply Air to a
track, but it appears grayed out on that track’s Channel screen, and is therefore
unavailable, you must first turn Air off on the track to which it is currently applied.
If you want to add Air to multiple vocals, you can use the Bounce feature.
Setting the Low Cut Filter
Use Low Cut to attenuate undesirable low frequencies such as mic handling
noise and wind noise.