Sound Devices 688 Скачать руководство пользователя страница 81

Страница: 81 / 210

User Guide

Setting the Frame Rate

By default, the 688’s frame rate for the timecode generator is set to 30nd.

The frame rate value is stored in the Frame Rate

eld of metadata.

When using an external timecode mode, ensure the mixer’s frame rate is equal

to (or cross-jam compatible to) the external frame rate.

To set frame rate for the timecode generator:

1. Press the MENU button.

2. Turn and press the Headphone encoder to select TIMECODE/SYNC > Frame

Rate. Options include: 23.98, 24, 25, 29.97nd, 29.97df, 30nd and 30df.

Setting Timecode Hold Off

Some devices that send Rec-Run timecode will have a tendency to occasionally

send short bursts of running or invalid timecode. When using these devices as

an external timecode to trigger recording, this behavior can result in uninten-

tional recordings or invalid timecode stamps on the mixer. To prevent this, the

688 features a Timecode Hold Off function.
This feature only applies when in Ext-TC Auto-Rec and Ext-TC Auto-Rec/Cont

timecode modes.
When using these external timecode auto-record modes, the 688 will delay the

start of recording for a speci

ed “hold” time. Running timecode that lasts for

less than the Hold Off value will not trigger a recording on the 688.

To set up Timecode Hold Off:

1. Press the MENU button.

2. Turn and press the Headphone encoder to select TIMECODE/SYNC > Hold

Off.

3. Specify the hold time in 0.1 second intervals. Options include: 0.0 s - 8.0 s.

If a pre-roll time is set, it will be applied. Pre-roll will only capture audio from the

initial detection of a timecode signal. If no pre-roll is selected, the

le will begin af-

ter the Hold Off period expires. It is best practice to set pre-roll to a value greater

than the speci

ed Hold Off value. This ensures that audio is captured from the mo-

ment a timecode signal is detected and that unintentional

les triggered by short

bursts of timecode are not generated.

Содержание 688



















































































































































































































Результаты поиска

Содержание 688

Отзывы:

Бренды по названию

Популярные бренды

Sound Devices 688, Руководство пользователя

Результаты поиска

Содержание 688

Отзывы:

Бренды по названию

Популярные бренды