Sound Devices 688 Скачать руководство пользователя страница 37

Страница: 37 / 210

User Guide

Adjusting Trim - Inputs 7-12

Inputs 1-6 have dedicated Trim controls, but that is not the case for inputs

7-12.

By attaching the optional CL-6 accessory, which provides additional dedicated

controls, the functionality of the Mini-faders on the 688 changes to become Trim
controls.

To adjust trim for inputs 7-12:

1. Access the Input Settings screen for the input chosen from 7-12.

2. Rotate the SELECT encoder to adjust the trim level. The gain value is dis-

played on the Input Settings screen.

Adjusting Pan

The Pan pot routes inputs to the left (L) and right (R) channels of the stereo

Master Bus. The Pan pot has a detent in its center (12 o’clock) position.

To adjust an input’s pan:

Turn the Pan pot.

After setting the pan, press the Pan pot in to recess the control when not in use.

Accessing Input Settings

The Main menu has a sub-menu of settings related to inputs. These may be

used to customize the con

guration of the 688.

To access Inputs sub-menu:

1. Press the MENU button.

2. Turn and press the Headphone encoder to select INPUTS.

Содержание 688



















































































































































































































Результаты поиска

Содержание 688

Отзывы:

Sound Devices 688, Руководство пользователя, Страница: 37 / 210

Результаты поиска

Содержание 688

Отзывы: