Sound Devices 688 Скачать руководство пользователя страница 130

Страница: 130 / 210

131

WINGMAN INTEGRATION: 6-SERIES

The three available meter views vary depending on the model of mixer to which

Wingman is connected; however, the procedure for toggling

through the available meter views is the same.

To change the meter view:

Slide a

ngertip vertically up or down over the meters.

The following table explains which pre-con

gured meter views are

available for each model in the 6-Series mixer/recorder line.

IXER

ETER

IEW

ESCRIPTION

688

LR, 1-12

This meter view shows left and right bus tracks as well as all 12

ISO tracks.

LR, X1-X6

This meter view shows output signals of left, right, and X1 - X6.

LR, X1, X2, RTNs

This meter view shows left, right, X1, and X2 bus tracks, plus

returns A, B and C.

664

LR, 1-12

This meter view shows left and right bus tracks as well as all 12

ISO tracks.

LR, X1, X2, RTNs

This meter view shows left, right, X1, and X2 bus tracks, plus

returns A, B and C.

LR, 1-6

This meter view shows left and right bus tracks as well as ISO

tracks 1-6.

633

LR, X1, X2, 1-6

This meter view shows left, right, X1, and X2 bus tracks as well

as all 6 ISO tracks.

LR, 1-6

This meter view shows left and right bus tracks as well as all 6

ISO tracks.

LR, X1-X4, RTN

This meter view shows left, right, X1, and X2 bus tracks, plus

X3 - X4 output signals, and return.

Содержание 688



















































































































































































































Результаты поиска

Содержание 688

Отзывы:

Бренды по названию

Популярные бренды

Sound Devices 688, Руководство пользователя

Результаты поиска

Содержание 688

Отзывы:

Бренды по названию

Популярные бренды