manualshive.com logo in svg

Sony ZRCT-100, Руководство по установке

Поделиться
Скачать
Sony ZRCT-100 Скачать руководство пользователя страница 9

3 (E)

ZRD-1/ZRD-2/ZRCT-100/ZRCT-200

Manual Structure

Purpose of this manual

This manual is the installation manual of Display Unit ZRD-1/ZRD-2 and Display 
Controller ZRCT-100/ZRCT-200.
This manual is intended for use by trained system and service engineers, and de-
scribes the information for installation of the system.

Related manuals

The following manuals are prepared for this system.

.

  ZRD-1/ZRD-2/ZRCT-100/ZRCT-200 Operating Instructions (available on 

request)

This manual is necessary for application and operation of this system.

.

  ZRD-1/ZRD-2 Service Manual (available on request)

.

  ZRCT-100 Service Manual (available on request)

.

  ZRCT-200 Service Manual (available on request)

This manual describes the information on the premise of providing the block level 
service (such as service overview, troubleshooting, replacement of parts, software 
update, circuit description, spare parts, and overall block diagram).

.

  Manual for Color Uniformity Alignment Software (available on request)

This manual describes the information on installing and servicing this system by 
using the software for service.

Trademarks

Trademarks and registered trademarks used in this manual are follows.

.

 Windows is a registered trademark of Microsoft Corporation in the United States 

and Other countries.

.

 Visual Studio is a registered trademark of Microsoft Corporation in the United 

States and Other countries.

.

 .NET Framework is a registered trademark of Microsoft Corporation in the United 

States and Other countries.

.

 The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI 

Logo are trademarks or registered trademarks of HDMI Licensing LLC in the 
United States and other countries.

.

 DisplayPort is a trademark or registered trademark of Video Electronics Standards 

Association in the United States and other countries.

Other system names, product names, and company names appearing in this manual 
are trademarks or registered trademarks of their respective holders.

Содержание ZRCT-100












































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды