Sony ZRCT-100, Руководство по установке

Страница: 131 / 171

6-35 (E)
ZRD-1/ZRD-2/ZRCT-100/ZRCT-200
6-12. Data Backup of Display Controller
The setting data of the display controller is saved (backed up) as a profile in Display Control Software.
When the setting data is changed, the data is backed up automatically. The backup data is updated only for
the changed data.
The setting data of the display controller saved as a profile in Display Control Software is as follows.
Menu (Screen) Items
Controller Connection Settings Connection Type (LAN/SERIAL)
Primary (On/Off)
IP Address/COM Port
ID(
*
), Total(
*
)
Unit Layout Settings Display Unit Allocation (display unit layout address of each display unit) (Example:
(1,2) and (C1-1-2))
Picture Allocation Number (picture starting point of each display unit) (Example: 7
(0,360))
System Settings Fan Mode
Photo Mode (Reserved)
Direct Array Power On
Light Output (Version earlier than 1.20.0)
Display Unit Power On Delay
Input Settings Input Select
Output Start Position
High Frame Rate Mode
Single Stream Mode (Version 1.22.0 or later)
Dynamic Range (HDMI Signal Format (Version 1.20.0 or later)
Picture Settings Contrast, Brightness, Gamma, Color Space, Color Temperature Setting
Picture Mode, HDR, Light Output (Version 1.20.0 or later)
3D Settings (Except for S/N
2000001 to 2000100 of
ZRCT-100 SY model) 2D/3D (Version 1.22.0 or later)
3D Dual Input Mode (On/Off)
3D Dual Input 4K Mode (On/Off)
3D Sync Signal Invert Mode (On/Off)
3D Sync Signal Delay
(
*
): These items are not displayed on Controller Connection Settings screen.
To back up the data manually
1. Display the Main screen.
2. On the menu bar, click [Tool], and then click [Back Up Controller Data].
The following dialog is displayed.