XAV-AX200/AX200C2
7
2. Con
fi
rmation After Destination Setting
Execute the following operation after completing the destination
setting, and con
fi
rm a correct destination was set.
1. The resetting operation is executed by pressing the reset but-
ton (The unit reboots and returns to the normal condition), and
press the [HOME] button on the main unit.
[Reset] button
[HOME] button
(Displayed screen in the above
fi
gure are example)
2. In the state of source off (Home screen is displayed), enter the
test mode by pressing the buttons on the remote commander in
order of the [4]
t
[5]
t
[0] (press only the [0] button for two
seconds).
(Displayed screen in the above
fi
gure are example)
3. The following screen is displayed and con
fi
rm that item of the
destination has been rewritten correctly.
(Displayed characters/values in the following
fi
gure are ex-
ample)
DEST :
00
MCU :
SONY-ST16-170630 0.12.00.00
SOC :
0.12.00.00
APP :
170630-561e70f
SYS :
170630-d98cb0a
SDK :
21.3.4.0.0.0.0.0
GUI :
1.13.0
BT Address : fc:4b:bc:f6:ac:15
Serial :
3166000615800021
DEST:
Destination
00
XAV-AX200: AEP, UK (EUR)
01
XAV-AX200: US, CND (UC)
03
XAV-AX200: AUS, LA (LA)
XAV-AX200C2: LA (LA)
12
XAV-AX200: E17 (E17)
15
XAV-AX200: IND (IN)
Note:
Refer to “DESTINATION ABBREVIATIONS” on page 4.
4. The resetting operation is executed by pressing the reset button
after the con
fi
rming ends, then the unit reboots and returns to
the normal condition.
[Reset] button
DEST :
00
MCU :
SONY-ST16-170630 0.12.00.00
SOC :
0.12.00.00
APP :
170630-561e70f
SYS :
170630-d98cb0a
SDK :
21.3.4.0.0.0.0.0
GUI :
1.13.0
BT Address : fc:4b:bc:f6:ac:15
Serial :
3166000615800021
(Displayed characters/values in the above
fi
gure are example)
COMMUNICATION CHECK OF Apple CarPlay OR Android
Auto
When the MAIN board or TFT board is replaced, be sure to per-
form the communication check of Apple CarPlay or Android Auto.
It is not necessary to check both of Apple CarPlay and Android
Auto. Check the communication with using either application.
Note 1:
If the application of Apple CarPlay or Android Auto cannot be
prepared, perform the “Checking procedure if Apple CarPlay or
Android Auto cannot be prepared” on page 8.
Note 2:
XAV-AX200C2 is not supported Apple CarPlay (iPhone).
Please check with Android Auto (Android phone).
Replacement parts that having the need to perform the
communication check:
• MAIN
board
• TFT
board
Preparation:
• In the case of checking with using the Apple CarPlay:
iPhone that is installed the Apple CarPlay and USB cable for
connection to the main unit
• In the case of checking with using the Android Auto:
Android phone that is installed the Android Auto and USB
cable for connection to the main unit
Note 3:
Refer to Operating Instructions of this unit about important point
for Apple CarPlay and Android Auto.
Connection:
+
–
Regulated DC
power supply
Android phone
or
iPhone
USB cable
– Rear view –
Checking procedure:
1. Refer to “Connection”, and connect the iPhone or Android
phone to the main unit with USB cable.
2. Press the [HOME] button on the main unit, and touch the Ap-
ple CarPlay icon or Android Auto icon.
(Displayed screen in the following
fi
gure are example)
[HOME] button
Android Auto icon
(or Apple CarPlay icon)
(Displayed screen in the above
fi
gure are example)
– Continued on next page –
Ver. 1.1
SYS SET
2018/04/20 05:09:38 (GMT+09:00)