Sony XAV-AX200 Скачать руководство пользователя

Страница: 9 / 62

XAV-AX200/AX200C2

4. After completing the check of step 3, press the [HOME] but-

ton on the main unit, swipe left the touch panel, and touch the
[Settings] on the touch panel.

[HOME] button

Touch the [Settings]

Swipe left

Swipe area

(Displayed screen in the above

gure are example)

5. The “General Settings” screen is displayed.

Move down the scrollbar on the touch panel to display the
“Factory Reset”, and touch it.

Touch the [Factory Reset]

Scrollbar

(Displayed screen in the above

gure are example)

6. The following screen is displayed, and touch the [Reset] on the

touch panel.

Touch the [Reset]

7. Check that this unit restarts and the logo of “SONY” is dis-

played on the screen, then turn the power off.

8. Remove the USB memory and speaker that is connected to this

unit.

This completes the communication check work.

TOUCH PANEL ADJUST

When the touch panel is replaced, perform the calibration of touch
panel according to the procedure below.

Procedure:

1.  Turn the power on this unit.
2.  Press the [HOME] button on the main unit.
3.  In the state of source off (Home screen is displayed), swipe left

the touch panel, and touch the [Settings] on the touch panel.

Touch the [Settings]

Swipe left

Swipe area

[HOME] button

(Displayed screen in the above

gure are example)

4. The “General Settings” screen is displayed.

Move down the scrollbar on the touch panel to display the
“Touch Panel Adjust”, and touch it.

Touch the [Touch Panel Adjust]

Scrollbar

(Displayed screen in the above

gure are example)

5. The following left screen is displayed, and continue to touch

the center of “ ” that is displayed on the touch panel until
“Complete” is displayed on the touch panel.

Cancel

Please touch for adjust.

Complete

Touch the center of “ ”

6. Touch the [Complete] on the touch panel to end the calibration.

Complete

Touch the [Complete]

NOTE FOR SECURITY FUNCTION

This unit does not use security function by password lock.

NOTE OF REPLACING THE ELECTRICAL PARTS ON
EACH BOARD FOR REPAIRING

Among mounted electrical parts on each board, only parts that are
described in the electrical parts list can be replaced for repairing.
The parts that are not described in the electrical parts list cannot be
replaced with single for repairing.

SYS SET

2018/04/20 05:09:38 (GMT+09:00)

Содержание XAV-AX200































































Результаты поиска

Содержание XAV-AX200

Отзывы:

Похожие инструкции для XAV-AX200

Бренды по названию

Популярные бренды

Sony XAV-AX200, Руководство по обслуживанию

Результаты поиска

Содержание XAV-AX200

Отзывы:

Похожие инструкции для XAV-AX200

Бренды по названию

Популярные бренды