Sony VPH-G70Q, Руководство по установке

Страница: 27 / 362

Connections
27
(EN)
Connections
R-Y
R
P
R
G
Y
B-Y
B
P
B
SYNC
HD
VD
INPUT A S VIDEO
OUT
IN
C IN
Y IN
VIDEO
OUT
IN
ABL LINK
OUT
IN
TRIGGER
IN
PLUG IN
POWER
OUT
REMOTE
INDEX
RS-422A
CONTROL S
AC IN
MAIN POWER
ON OFF
100~120V 15A 250V
200V~240V T6.3A 250V
IN
OUT MODE
REMOTE1
You can expand the system connections by using the IFB-40 Signal
Interface Board which is installed to the projector by default, or in
combination shown in the examples below.
When multiple input sources are connected to the projector
Use the IFU-1271/1271M Signal Interface Unit.
Connecting Directly to the Projector
Rear
R
G
VD
VIDEO OUT AC power cord
(supplied)
Setting up
• Set INPUT-A in the SET SETTING menu to RGB.
For details, see “The SET SETTING Menu” on page 51 (EN).
• Select VIDEO or S VIDEO by pressing the INPUT SELECT keys on the
remote control or by setting VIDEO in the INPUT SELECT menu.
For details, see “The INPUT SELECT Menu” on page 45 (EN).
• Switch the 75-ohm terminate connectors according to the connections of
the computer and color monitor.
For details, see “Switching the 75-ohm Terminate Connectors” on page 25
(EN).
to video input
Color
monitor
to RGB output
to RGB output
to RGB input
Color
monitor
Video equipment
to video
output
to S Video
output
S VIDEO IN VIDEO IN
to a wall outlet
AC IN
to RGB input
B
SYNC/HD
Computer
IFU-1271/1271M
IFB-12