Sony VPH-G70Q, Руководство по установке

Страница: 29 / 362

Connections
29
(EN)
Connections
R-Y
R
P R
G
Y
B-Y
B
P
B
SYNC
HD
VD
INPUT A S VIDEO
OUT
IN
C IN
Y IN
VIDEO
OUT
IN
ABL LINK
OUT
IN
TRIGGER
IN
PLUG IN
POWER
OUT
REMOTE
INDEX
RS-422A
CONTROL S
AC IN
MAIN POWER
ON OFF
100~120V 15A 250V
200V~240V T6.3A 250V
IN
OUT
MODE
REMOTE1
When the switcher is connected to the projector using both the SIC-M or CCQ-BRS
connecting cable and the 5BNC cables (5BNC mode 1)
When you connect both the video and RGB signal input sources to the
switcher, use the SIC-M or CCQ-BRS connecting cable and the BNC
cables for connection between the projector and switcher.
to MONITOR OUT
AC power cord
(supplied)
to a wall outlet
5BNC cables
Rear
R G B SYNC/HD VD
Notes
• Insert the female and male plugs of the SIC-M or CCQ-BRS cable correctly.
• You can extend the SIC-M or CCQ-BRS cable up to 50 m.
• The video signal input to the signal interface board installed to the INPUT B
section should not exceed 70 MHz. When projecting the video signal which
exceeds 70 MHz, connect the signal source to the INPUT A connectors using the
5BNC cables.
Setting up
• Set INPUT-A to RGB and 5BNC MODE to ON in the SET SETTING
menu.
For details, see “The SET SETTING Menu” on page 51 (EN).
• Select VIDEO or S VIDEO by pressing the INPUT SELECT keys on the
remote control or by setting VIDEO in the INPUT SELECT menu.
For details, see “The INPUT SELECT Menu” on page 45 (EN).
• Set the SINGLE/SECOND/OTHER select switch on the switcher to
SINGLE.
Video
equipment
HDTV/
Component
equipment
S VIDEO IN
AC IN
VIDEO IN
IN
PC-1271/1271M
Switcher
to REMOTE 1
OUT
SIC-M or CCQ-BRS
connecting cable
to S Video
output to video
output
IFB-40 Signal Interface Board
Computer Computer
Video
equipment