Troubleshooting Your Computer
Why doesn't my computer start?
Make sure the computer is securely plugged into a power source and is turned on. Make sure the power indicator
shows the power is on. See
Powering Your Computer
for more information.
Make sure the battery is inserted properly and is charged.
If you are connected to a docking station with a floppy disk drive or an external floppy disk drive, make sure the
floppy disk drive is empty.
If the computer is plugged into a power strip or Uninterruptible Power Supply (UPS), make sure the power strip or
UPS is turned on and working.
If you are using an external display, make sure it is plugged into a power source and turned on. Make sure the
brightness and contrast controls are adjusted correctly. See the manual that came with your display for details.
Remove the battery from the computer, unplug the power cord, and plug it in again. Turn on the power.
If the power control button does not function, remove the AC adapter and battery. Wait one minute, and then
reattach them before pressing the power button.
Condensation may cause the computer to malfunction. If this occurs, do not use the computer for at least one hour.
Unplug the power cord, press the reset button by using a thin, straight object (such as a paper clip), remove the
battery, plug it in again, and turn on the power.
Why does a BIOS error appear when my computer starts?
When the battery is low on power, your system may not start properly, and the message "Press <F1> to resume, <F2> to
setup" may appear at the bottom of the screen. Follow these steps:
1.
Press
F2
. The
BIOS Setup
menu appears.
2.
Set the date (month/day/year). Press
Enter
.
3.
Press the
Down Arrow
key
to select
System Time
, and then set the time (hour: minute: second). Press
Enter
.
4.
Press the
Right Arrow
key
to select the Exit tab, and then press the
Down Arrow
key
to select
Get
Default Values
. The message
Load default values for all SETUP items
appears.
5.
Press
Enter
. The
Setup Confirmation
window appears.
6.
Select
Yes
, and press
Enter
.
7.
Select
Exit (Save Changes)
, and press
Enter
. The
Setup Confirmation
window appears again.
8.
Select
Yes
, and press
Enter
. The computer restarts.
If this occurs on a regular basis, contact Sony Computing Support (
http://www.sony.com/pcsupport
).
Why does the message "Operating system not found" appear whem my computer starts, and why won't Windows
start?
If you have connected a docking station with a floppy disk drive or an external floppy disk drive, make sure there is
no disk in the floppy disk drive (non-bootable).
If a non-bootable floppy disk is in the drive, proceed as follows:
1.
Turn off the computer, and remove the floppy disk.
2.
Restart the computer and confirm that the Windows
®
operating system starts properly.
If Windows still does not start, follow these steps to initialize the BIOS:
Page 142
Содержание VAIO PCG-FXA63
