Sony UWP-V1 Скачать руководство пользователя страница 89

Страница: 89 / 164

3-1

UWP Series

3-1. Notes on Repair Parts

1. Safety Related Components Warning

Components marked

are critical to safe operation.

Therefore, specified parts should be used in the case of
replacement.

2. Standardization of Parts

Some repair parts supplied by Sony differ from those
used for the unit. These are because of parts common-
ality and improvement.

3. Stock of Parts

Parts marked with “o” at SP (Supply Code) column of
the spare parts list may not be stocked. Therefore, the
delivery date will be delayed.

4. Harness

Harnesses with no part number are not registered as
spare parts.

5. Destination Representation

The part indicated “For U/CE/AU/CN/E” in the spare
parts list is used in the unit written below.
For U:

The part is used in a unit for the U.S.A. and
Canada.

For CE: The part is used in a unit for the European.
For KR: The part is used in a unit for the Korea.

Section 3

Spare Parts

Содержание UWP-V1





































































































































































Результаты поиска

Содержание UWP-V1

Отзывы:

Похожие инструкции для UWP-V1

Бренды по названию

Популярные бренды

Sony UWP-V1, Руководство по обслуживанию

Результаты поиска

Содержание UWP-V1

Отзывы:

Похожие инструкции для UWP-V1

Бренды по названию

Популярные бренды