21
To cancel the setting
Go back to step 3 or 5 by shifting the menu lever to the
left in step 7.
To continue menu operations
Make settings by repeating steps 3 to 7.
To end the menu operations
Display “READY” by shifting the menu lever to the left
after step 7.
The unit exits the menu mode.
Menu lock function
If the message “LOCK” is displayed and you hear the
alarm sound when you push the menu lever, the menu
lever is disabled because the menu operation function is
locked. If you want to perform a menu operation, contact
the nearest authorized dealer.
Registering Menu Settings
You can store up to three sets of settings made using the
menu, and you can load the desired setting when needed.
The unit retains these settings even if you turn off the
power.
Note
When you use the unit for the first time after you
purchase it, factory settings are registered in all three of
the stored selections.
To register new settings
1
Make all of the required settings.
2
Display “CONFIG.” by shifting the menu lever up
or down, and then push the menu lever or shift it to
the right.
The unit enters the menu in which you can make
setting for printer operation.
3
Display “-SAVE” by shifting the menu lever up or
down, and then push the menu lever or shift it to the
right.
The number is displayed like “SAVE:1.”
4
Select the desired number by shifting the menu
lever up or down, and then push the menu lever.
The value set in step 1 is registered to the number
selected.
To load the desired settings
You can load the desired settings and make printouts
with the loaded settings.
1
Confirm that “READY” is displayed on the LCD,
and push the menu lever.
2
Display “CONFIG.” by shifting the menu lever up
or down, and then push the menu lever or shift it to
the right.
3
Display “-LOAD” by shifting the menu lever up or
down, and then push the menu lever or shift it to the
right.
The number is displayed like “LOAD:1.”
4
Select the desired number of setting content by
shifting the menu lever up or down, and then push
the menu lever.
The setting of the number selected is loaded.
When you change the loaded settings
The unit operates according to the changed settings. In
this case, the unit operates according to these settings
until you load another set of settings, even if you turn off
the unit. When you load another group of settings, the
settings loaded previously are cleared.
To retain previously loaded settings
Example: Settings registered as setting 1 are loaded and
settings are to be changed. To retain the original settings
of setting 1 and to register the new settings as setting 2,
proceed as follows.
1
Load the settings of “LOAD:1” following the
procedure for loading the desired settings.
2
Change the loaded settings as required.
3
Select “SAVE:2” following procedure for
registering the settings.
4
Push the menu lever.
The settings, changed in step 2, are registered as
“SAVE:2.”
Printing the Menu List
You can make a printout of the current menu settings.
1
Push the menu lever.
The menu item is displayed and the unit enters
menu mode.
2
Display “PRT.MENU” by shifting the menu lever
up or down, and then push the menu lever or shift it
to the right.
