14
1
Press the
1
On/standby switch to on.
When paper is not loaded yet, the back light on the
LCD lights in orange and the message “EMPTY” is
displayed.
2
Press the OPEN button to open the door panel.
3
Remove the label from the leading edge of the
paper, pull out about 15 cm to 20 cm (6 inches to
8 inches) of the paper, and then set the paper roll in
the paper tray.
Note
When installing/removing the paper to/from the
paper tray, be careful not to drop the paper or put
the paper on desk, etc., with the surface of the paper
facing downward. If any dirt or other matter
adheres to the print side of the paper, the paper may
become unusable.
Remove label and pull out
15 cm to 20 cm (6 inches to
8 inches).
Load the paper in the orientation shown in
the diagram. Printing is not possible if the
paper is reversed.
Make sure that the paper is set
straight.
