background image

6-1

UP-D70XR

Section 6

Troubleshooting

6-1. Mechanical Section

Trouble

Cause

Countermeasure

Feed paper tray is not

1 : Paper is out of tray.

1 : Remove paper delivery tray, return the paper to

pulled out.

 the paper feed tray.

2 : Push ratch defective.

2 : Replace the push ratch.

3 : Paper feed lever is not returned and is

3 : If paper feed lever drive cam is transformed,

risen.

replace it.

3 : If paper feed lever drive cam is bent, replace

the mechanism deck.

Ribbon cassette is not

1 : Ribbon is removed from ribbon holder.

1 : Set the ribbon to the ribbon holder correctly.

pulled out.

1 : If the ribbon holder is defective, replace the

 ribbonholder.

2 : Head is not risen to the home

2 : If head drive arm is removed, assemble it

position.

correctly.

2 : If head drive arm is damaged, replace the head

drive axis ass’y.

Paper is not out from

1 : Pick up roller is slipped.

1 : Replace the pick-up roller.

the tray.

2 : Paper curls.

2 : Replace the paper.

3 : Paper feed lever is not risen.

3 : Replace the paper feed lever ass’y.

Papers are sent

1 : Limiter defective.

1 : Replace the limiter.

more than two sheets.

2 : Separation roller is slipped.

2 : Replace the separation roller.

3 : Paper is stuck on somewhere.

3 : Replace the paper.

Paper is sent slantly.

1 : Paper guide (S) of paper feed tray is

1 : Replace the paper guide (S).

bent.

2 : Roller is slipped.

2 : If the pick-up roller is slipped, replace it.
2 : If the paper feed roller is slipped, replace it.
2 : If the separation roller is slipped, replace it.

3 : Edge sensor defective.

3 : Correct the edge sensor attached portion of

paper delivery guide (B).

3 : Replace the edge sensor.
3 : Replace the paper delivery guide (B).

Paper is stopped at the

1 : Head is not risen at correctly

1 : If the head drive arm is removed, assemble it

halfway of paper feeding.

position.

correctly.

1 : If the head drive arm is damaged, replace the

head drive axis ass’y.

1 : Replace the take up motor.

2 : Ribbon is not moved.

2 : Replace the take up motor.

3 : Paper curls.

3 : Replace the paper.

4 : PATH 0 sensor defective.

4 : Replace the PATH 0 sensor.

5 : Edge sensor defective.

5 : Replace the edge sensor.

6 : Paper is caught up to harness.

6 : Dress the harness correctly.

When feeding the paper,

1 : Paper curls.

1 : Replace the paper.

paper is bent.

Содержание UP-D70XR

































































































Отзывы: