Sony UP-D70XR, Руководство по обслуживанию

Страница: 46 / 96

3-8
UP-D70XR
Fig. (7)
8. Yellow printing completion, and the ribbon sticking and peeling off.
.
After yellow printing, in case the most rear edge of printing paper does not come to the pass
changing point. While ribbon is moved, paper is more sent about 10 mm. Ribbon and paper after
printing are peeled off. After that, head is set at MIDDLE position. Paper is sent until the paper
comes the pass changing point.
.
After yellow printing, in case the most rear edge of printing paper overs the pass changing point.
Head is set to MIDDLE position. Ribbon take-up motor is rotated reversely little to slacken the
ribbon. Paper is rewound about 20 mm by ribbon supply motor with back tension, ribbon and
paper after are peeled off.
Fig. (8)
9. Return of paper & beginning detection of magenta ribbon
.
In case ordinary paper, while ribbon is sent to next ribbon code, the paper is returned to the printing
position by rotating capstan reversely.
.
In case OHP, paper is returned to the printing position by rotating capstan reversely, ribbon is sent
to next ribbon code.
.
After that, ribbon is sent from ribbon code to true print position.