2
STR-DA7100ES
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE
0
SUR
LES DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES
PIÈCES SONT CRITIQUES POUR LA SÉCURITÉ DE
FONCTIONNEMENT. NE REMPLACER CES COM- POSANTS
QUE PAR DES PIÈCES SONY DONT LES NUMÉROS SONT
DONNÉS DANS CE MANUEL OU DANS LES SUPPLÉMENTS
PUBLIÉS PAR SONY.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE
WITH MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.
•
Abbreviation
CH : Chinese model
CND : Canadian model
KR : Korean model
TW : Taiwan model
Reference Power Output
(4 ohms 1 kHz, THD
0.7%):
FRONT
2)
: 170 W + 170 W
CENTER
2)
: 170 W
SURR
2)
: 170 W + 170 W
SURR BACK
2)
: 170 W +
170 W
1)
Depending on the sound field settings and the
source, there may be no sound output.
2)
Measured under the following conditions:
Frequency response
Inputs (Analog)
Inputs (Digital)
Outputs
EQUALIZER
FM tuner section
Tuning range
87.5 - 108.0 MHz
Antenna
FM wire antenna
Antenna terminals
75 ohms, unbalanced
Sensitivity
Mono:
18.3 dBf, 2.2
µ
V/75 ohms
Stereo:
38.3 dBf, 22.5
µ
V/75 ohms
Usable sensitivity 11.2 dBf, 1
µ
V/75 ohms
S/N
Mono:
76 dB
Stereo:
70 dB
Harmonic distortion at 1 kHz
Mono:
0.3%
Stereo:
0.5%
Separation
45 dB at 1 kHz
Frequency response 30 Hz – 15 kHz, +0.5/–2
dB
Selectivity
60 dB at 400 kHz
AM tuner section
Tuning range
Models of area code US, CND:
530 – 1,710 kHz
3)
(With 10-kHz tuning scale)
531 – 1,710 kHz
3)
(With 9-kHz tuning scale)
Area code
Power requirements
US, CND
120 V AC, 60 Hz
TW
110 V AC, 60 Hz
AEP
230 V AC, 50/60 Hz
KR
230 V AC, 60 Hz
PHONO
RIAA equalization curve
±
0.5 dB
Power Amp Block
10 Hz – 50 kHz
±
3 dB (8 ohms)
PHONO
Sensitivity: 2.5mV
Impedance: 50kohms
S/N: 86dB (A, 20 kHz
LPF)
MULTI CHANNEL
INPUT1/2, SA-CD/CD,
TAPE, MD/DAT, DVD,
TV/SAT, VIDEO1/2/3
Sensitivity: 150mV
Impedance: 50kohms
S/N: 96dB (A, 20 kHz
LPF)
CH
230 V AC, 50 Hz
SA-CD/CD, DVD
(Coaxial)
Impedance: 75ohms
S/N: 96dB (A, 20 kHz
LPF)
SA-CD/CD, DVD,
TV/SAT, MD/DAT,
VIDEO 3 (Optical)
S/N: 96 dB
(A, 20 kHz LPF)
TAPE, MD/DAT
(REC OUT),
VIDEO1/2 (AUDIO OUT)
Voltage:150mV
Impedance: 10kohms
FRONT L/R, CENTER,
SURROUND L/R,
SURROUND BACK L/R,
SUB WOOFER
Voltage: 2V
Impedance: 1kohms
Gain levels
±
10 dB, 1 dB step
Models of other area codes:
531 – 1,602 kHz
(With 9-kHz tuning scale)
Antenna
Loop antenna
Usable sensitivity
50 dB
µ
/m (at 1,000 kHz or
999 kHz)
S/N
54 dB (at 50 mV/m)
Harmonic distortion 0.5% (50 mV/m, 400 Hz)
Selectivity
At 9 kHz:
35 dB
At 10 kHz:
40 dB
3)
You can change the AM tuning scale to either 9
kHz or 10 kHz. After tuning in any AM station,
turn off the receiver. While holding down PRESET
or , press
?
/
1
. All preset
stations will be erased when you change the tuning
scale. To reset the scale to 10 kHz (or 9 kHz),
repeat the procedure.
Video section
Inputs/Outputs
Video:
1 Vp-p, 75 ohms
S-video:
Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
COMPONENT VIDEO:
Y: 1 Vp-p, 75 ohms
P
B
/C
B
/B-Y: 0.7 Vp-p, 75
ohms
P
R
/C
R
/R-Y: 0.7 Vp-p, 75
ohms
80 MHz HD Pass Through
(When PROGRESSIVE
OUT is set to “OFF”)
i.LINK section
Pin
4 pins
Transmission speed S200 (Maximum data
transmission speed 200
Mbps)
Transmission protocol
A/M transmission protocol
Format (input)
Super Audio CD* (DSD
PLAIN)
2 channel linear PCM
(IEC-60958-3)
Sampling frequency: 44.1
kHz
* Conforms to the copy protection technology of
DTLA (Revision 1.3).
General
Power requirements
Power consumption
Power consumption (during standby mode)
1 W
AC outlets
Dimensions
430
×
175
×
470 mm
(17
×
7
×
18
5
/
8
in.)
including projecting parts
and controls
Mass (Approx.)
23.5 kg (51 lb. 13 oz.)
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
AC power cord (1)
Remote commander RM-AAE003 (1)
LR6
(size-AA) batteries (3)
Remote commander RM-US106A (1)
R6 (size-AA) batteries (2)
Design and specifications are subject to
change without notice.
Area code
Power requirements
US, CND
120 V AC, 60 Hz
AEP
230 V AC, 50/60 Hz
TW
110 V AC, 60 Hz
KR
220 V AC, 60 Hz
Area code
Power consumption
US, AEP, TW, KR,
CH
250 W
CND
300 VA
Area code
AC outlets
US, CND
2 switched, 120 W/1A MAX
AEP
1 switched, 100 W MAX
TW, KR, CH
– (no AC outlet)
CH
220 V AC, 50 Hz
Ver 1.2
