Sony SLV-L45AR, Руководство по обслуживанию

Страница: 51 / 87

5-17
3-12.REEL DRIVE MECHANISM
3-12-1. REEL BELT, REEL PULLEY, FRICTION
GEAR ASSEMBLY AND CLUTCH CHANGE
LEVER (See Fig. 3-12-1)
1) Refer to section 3-2 and remove the mechanism unit.
2) Remove the reel belt
1
from the reel pulley
2
.
3) Take off the washer
3
and remove the reel pulley
2
.
4) Take off the washer
4
and remove the friction gear
assembly
5
.
5) Remove the clutch change spring
6
.
6) Remove the clamp
7
gripping the top of the mecha-
nism chassis, then remove the clutch change lever
8
.
ASSEMBLY NOTES:
1. After cleaning the shafts
9
and
0
, apply a drop of oil
(NT-68) to each.
2. Be careful not to get any grease on the reel belt
1
.
1
Reel belt
3
Washer
2
Reel pulley
8
Clutch change lever
4
Washer
5
Friction gear
assembly
9
Shaft
0
Shaft
7
Clamp
6
Clutch change
spring
Fig. 3-12-1
3-12-2. CLUTCH MOUNTING ASSEMBLY
(See Fig.3-12-2)
1) Refer to section 3-3-1 and remove the cassette mecha-
nism assembly.
2) Refer to section 3-12-1 and remove the reel pulley.
3) Remove the two screws
1
, then remove the clutch
mounting assembly
2
.
ASSEMBLY NOTES:
1. Align the two holes 3 with the shafts
4
and
5
. Be
careful not to press part A of the clutch mounting
assembly
2
against the band brake assembly.
2. After assembly, make sure that the clamp on the clutch
change lever has snapped into the chassis.
1
Screws
3
Hole
2
Clutch
mounting
assembly
5
Shaft
4
Shaft
3
Hole
Part A
Fig. 3-12-2
3-12-3. S SOFT LEVER, SUPPLY REEL ASSEM-
BLY AND S REEL GEAR (See Fig. 3-12-3)
1) Remove the S soft spring
1
.
2) Remove the clamp
2
, then remove the S soft lever
3
.
3) Refer to section 3-12-2 and remove the clutch mounting
assembly.
4) Refer to section 3-11 and remove the band brake
assembly, then remove the supply reel assembly
4
and
the S reel gear
5
.
ASSEMBLY NOTES:
1. After cleaning the shafts
6
and
7
, apply a drop of oil
(NT-68) to each.
2. After assembly, clean the side of the supply reel assem-
bly
4
.
7
Shaft
6
Shaft
5
S reel
gear
4
Supply reel
assembly
3
S soft lever
2
Clamp
1
S soft
spring
Fig. 3-12-3