Sony RM-IP500, Руководство по эксплуатации

Страница: 75 / 86

75
FOCUS DIAL
GPI I/O
Sets the GPI I/O connector signal format and tally
operation mode.
SETTING
TALLY MODE
This setting is enabled when SETTING is set to
INPUT.
COMMAND SEL
CAMERA LINK
Tally lamp control operation
Settings (Bold:
default value)
Description
STANDARD Turning the FOCUS knob
clockwise moves the focus in the
Far direction, and turning
counterclockwise moves the
focus in the Near direction.
REVERSE Turning the FOCUS knob
clockwise moves the focus in the
Near direction, and turning
counterclockwise moves the
focus in the Far direction.
Settings (Bold:
default value)
Description
INPUT Sets the control signal direction of
the GPI I/O connector to INPUT. In
this case, connect a tally control
input signal to the connector.
OUTPUT Sets the control signal direction of
the GPI I/O connector to OUTPUT.
In this case, the connector
functions as a contact output
connector which outputs the
camera number of the target
camera.
Settings (Bold:
default value)
Description
NORMAL Displays the tally input lamp
corresponding to the number of
the camera with tally input ON,
and automatically selects the
camera as the target camera.
ON AIR Displays the tally input lamp
corresponding to the number of
the camera with tally input ON.
Settings (Bold:
default value)
Description
STANDARD Sets the input/output method to
STANDARD method. The camera
numbers and input/output pin
numbers have a 1:1
correspondence.
• If the unit and cameras are
connected by serial
connection, cameras 1 to 7
correspond to input/outputs 1
to 7.
• If the unit and cameras are
connected by LAN connection,
cameras 1 to 10 in group 1
correspond to input/outputs 1
to 10.
EXPAND Handles camera numbers as
binary numbers.
• Tally input numbers 8 and
higher in a serial connection
are ignored. In this case, the
response is equivalent to no
input.
• Numbers in a LAN connection,
corresponding to cameras 1 to
10 in groups 1 to 10, are
handled as the numbers 1 to
100. Tally input numbers 101
and higher are ignored. In this
case, the response is
equivalent to no input.
Settings (Bold:
default value)
Description
ON , OFF Turns tally lamp control on/off.
The tally lamp control operation
varies depending on the
combination of the SETTING and
CAMERA LINK settings. For
details, see “Tally lamp control
operation” below.
Tally lamp
Tally input lamps