Sony MVC-CD200, Руководство по обслуживанию

Страница: 27 / 132

1-21
86
USB CONNECT PTP Switches the USB mode (page 35).
x
NORMAL
DEMO
x
ON This is activated only when using the AC
power adaptor. [DEMO] is set to [STBY] at
the factory and the demonstration starts
about 10 minutes after you have set the
mode dial to
, S, A, M, or SCN. To
cancel the demonstration, turn off the power.
OFF
Item Setting Description
87
Ad
diti
onal
inf
orma
tion
Additional information
Precautions
The set is not disconnected from the
AC power source (mains) as long as it
is connected to the wall outlet, even if
the set itself has been turned off.
Do not carry the camera by holding
the disc cover
Do not touch the rotating disc
This may cause serious injuries.
When the pickup lens is dirty and the
camera cannot read any image, clean
the pickup lens using a commercially
available blower.
Cleaning the LCD screen
Wipe the screen surface with a
cleaning cloth (not supplied) or an
LCD cleaning kit (not supplied) to
remove fingerprints, dust, etc.
Cleaning the camera surface
Clean the camera surface with a soft
cloth slightly moistened with water,
then wipe the surface dry. Do not use
any type of solvent such as thinner,
alcohol or benzene as this may damage
the finish or the casing.
After using your camera at the
seashore or other dusty locations
Clean your camera carefully.
Otherwise, the salty air may corrode
the metal fittings or dust may enter the
inside of your camera, causing a
malfunction.
Your camera is designed for use
between the temperatures of 0°C to
40°C (32°F to 104°F). Recording in
extremely cold or hot places that
exceed this range is not recommended.
If the camera is brought directly from a
cold to a warm location, or is placed in
a very damp room, moisture may
condense inside or outside the camera.
Should this occur, the camera will not
operate properly.
Moisture condensation occurs
easily when:
•
The camera is brought from a cold
location such as a ski slope into a
warmly heated room.
•
The camera is taken from an air-
conditioned room or car interior to
the hot outdoors, etc.
How to prevent moisture
condensation
When bringing the camera from a cold
place to a warm place, seal the camera
in a plastic bag and allow it to adapt to
conditions at the new location over a
period of time (about an hour).
On handling the camera
On pickup lens cleaning
On cleaning
Pickup
lens
On operating temperature
On moisture condensation
88
If moisture condensation occurs
Turn off the camera and wait about an
hour for the moisture to evaporate.
Note that if you attempt to record with
moisture remaining inside the lens, you
will be unable to record clear images.
Do not touch the pickup lens inside the
disc cover. And do not open the disc
cover except when inserting or
removing a disc to keep dust out.
•
Unplug the unit from the wall outlet
(mains) when you are not using the
unit for a long time. To disconnect
the power cord (mains lead), pull it
out by the plug. Never pull the power
cord (mains lead) itself.
• Do not operate the unit with a
damaged cord (mains lead) or if the
unit has been dropped or damaged.
• Do not bend the power cord (mains
lead) forcibly, or place a heavy object
on it. This will damage the cord
(mains lead) and may cause fire or
electrical shock.
• Prevent metallic objects from coming
into contact with the metal parts of
the connecting section. If this
happens, a short may occur and the
unit may be damaged.
• Always keep metal contacts clean.
• Do not disassemble the unit.
• Do not apply mechanical shock or
drop the unit.
• While the unit is in use, particularly
during charging, keep it away from
AM receivers and video equipment.
AM receivers and video equipment
disturb AM reception and video
operation.
• The unit becomes warm during use.
This is not a malfunction.
• Do not place the unit in locations that
are:
— Extremely hot or cold
— Dusty or dirty
— Very humid
— Vibrating
•
Use only the specified charger with
the charging function.
•
To prevent accident from a short
circuit, do not allow metal objects to
come into contact with the battery
terminals.
•
Keep the battery pack away from fire.
•
Never expose the battery pack to
temperatures above 60°C (140°F),
such as in a car parked in the sun or
under direct sunlight.
•
Keep the battery pack dry.
•
Do not expose the battery pack to any
mechanical shock.
•
Do not disassemble nor modify the
battery pack.
•
Attach the battery pack to the camera
securely.
•
Charging while some capacity
remains does not affect the original
battery capacity.
On pickup lens
On AC power adaptor
On battery pack
89
Ad
diti
onal
inf
o
rma
tion
Your camera is supplied with a built-in
rechargeable lithium battery installed
so as to retain the date and time, etc.,
regardless of the setting of the POWER
switch. The built-in rechargeable
lithium battery is always charged as
long as you are using your camera. The
battery, however, will get discharged
gradually if you do not use your
camera. It will be completely
discharged in about one month if you
do not use your camera at all. Even if
the built-in rechargeable lithium
battery is not charged, it will not affect
the camera operation. To retain the
date and time, etc., charge the battery if
the battery is discharged.
Charging the built-in rechargeable
lithium battery:
•
Connect your camera to house
current (mains) using the AC power
adaptor supplied with your camera,
and leave your camera with the
power turned off for more than 24
hours.
• Or install the fully charged battery
pack in your camera, and leave your
camera with the power turned off for
more than 24 hours.
If any problem occurs, unplug your
camera and contact your nearest Sony
dealer.
On discs
Be sure to use only 8 cm CD-Rs/CD-
RWs. You cannot read or write data on
other type discs that do not correspond
to this camera.
• Do not clean a disc using a cleaner
before recording. Use a
commercially available blower to
remove dust.
• If fingerprints, dust, drop of water, or
oil makes the recordable side (the
other side of the printed side) of a
disc dirty, the camera may not
properly record an image on the disc.
You should handle a disc with a lot of
care.
• If a disc does become dirty, wipe it in
a straight line from center to edge
with a soft dry cloth or a soft cloth
lightly moistened with a mild
detergent solution. You can use a
commercially available CD cleaner.
• Do not use any solvent (benzine,
thinner, static protection product,
record cleaner, etc.) to clean a disc.
Notes
•
Do not remove the disc while reading or
writing data.
On the built-in rechargeable
lithium battery
On cleaning