44
GB
x
DISTANCE (MHC-GNZ9D/GNZ8D only)
The default distance setting for the speakers in
relation to the listening position is shown below.
When you set the distance using the Quick Setup
(page 14), the settings is automatically
displayed.
Be sure to change the value in the Setup Display
when you move the speakers.
Any items that are set to “NONE” in the “SIZE”
setting will not appear.
The default settings are underlined.
1)
When you perform the Quick Setup (page 14), the
default settings are changed.
2)
The setting range changes depending on the front
speaker setting.
Notes
• When you set the distance, the sound may cut off for
a moment.
• If all front and surround speakers are not placed at an
equal distance from your listening position, set the
distance according to the closest speaker.
• Do not place the surround speakers farther away
from your listening position than the front speakers.
• Depending on the input stream, the “DISTANCE”
setting may not be effective.
x
LEVEL (FRONT)
You can vary the level of front speakers as
follows. Be sure to set “TEST TONE” to “ON”
for easy adjustment.*
1)
MHC-GNZ9D/GNZ8D only
2)
Depending on the subwoofer type, sound output can
be smaller than that of other speakers during using
the test tone.
x
LEVEL (SURROUND) (MHC-GNZ9D/
GNZ8D only)
You can vary the level of surround speakers as
follows. Be sure to set “TEST TONE” to “ON”
for easy adjustment.
Any items that are set to “NONE” in the “SIZE”
setting will not appear.
The default settings are underlined.
To adjust the volume of all the
speakers at one time
Press or – (or turn VOLUME
control on the unit).
FRONT
3.0 m
1)
Front speaker distance from the
listening position can be set in
0.2 meter increments from 1.0 to
7.0 meters.
CENTER
3.0 m
1)
Center speaker distance from the
listening position can be set in
0.2 meter increments from 0.0 to
7.0 meters.
2)
SURROUND
3.0 m
1)
Surround speaker distance from the
listening position can be set in
0.2 meter increments from 0.0 to
7.0 meters.
2)
1.0 - 7.0 m
0.0 - 7.0 m
L
0 dB
Set this between –6 dB and 0 dB
in 1 dB increments.
R
0 dB
Set this between –6 dB and 0 dB
in 1 dB increments.
CENTER
1)
0 dB
Set this between –6 dB and +6 dB
in 1 dB increments.
SUBWOOFER
0 dB
MHC-GNZ9D: Set this between
–6 dB and +6 dB in 1 dB
increments.
MHC-GNZ8D
2)
: Set this between
–10 dB and +10 dB in 1 dB
increments.
MHC-GNZ7D: Set this by
selecting from –10 dB, –4 dB or
0 dB.
L
0 dB
Set this between –6 dB and +6 dB
in 1 dB increments.
R
0 dB
Set this between –6 dB and +6 dB
in 1 dB increments.
