Sony MDS-B5 Скачать руководство пользователя

Страница: 72 / 104

8-1

Chapter 8 Maintenance

8-2

Chapter 8

Maintenance

8-2 Display Messages

The following tables explain in the various messages
that appear in the display window.

Messages during specifying tracks for
program playback and multi-access
function

Message

Meaning

Program Full!

During specifying tracks for program
playback, an attempt was made to specify
more than 25 tracks.
During specifying tracks for multi-access
function, an attempt was made to specify
more than 10 tracks.

Messages during recording

Message

Meaning

Cannot Copy

An attempt was made to record from copy-
protected source by SCMS (Serial Copy
Management System).

DIN Unlock

Connections on the digital input
connectors are inappropriate.

Disc Full!!

The MD is full.

Premastered

An attempt was made to record on the
disc only for playback.

Protected

The inserted MD is record-protected.

Messages during editing the MD

Message

Meaning

Cannot Edit

An attempt was made under the condition*
you cannot edit the MD.

Cannot Undo

The last operation is unable to cancel.

CP Full !!

An attempt was made to specify more
than 255 cue points.

Impossible

The edit operation was invalid because of
restriction on the system.

Name Full !!

An attempt was made to enter more
characters than the restriction.

No Cue Point

No cue point was specified for the
selected track.

No Head Trim

No head trim setting was specified for the
selected track.

No End Trim

No end trim setting was specified for the
selected track.

Premastered

During the disc edit mode, an attempt was
made to edit the disc only for playback.

Protected

The inserted MD is record-protected.

* The conditions under which you cannot edit the MD are as

follows:
• When using the program play, shufle play, or Multi-

Access function

• When erasing, dividing, combining, or moving tracks

using the remote controller while the MD deck is
stopped.

Other messages

Message

Meaning

No Name

No title is specified for the track or the
disc.

No Disc

There is no disc in the MD deck.

No Track

The inserted MD has a disc title but no
tracks.

Disc Error

The MD is scratched or missing a TOC.

Blank Disc

A new (blank) or erased MD has been
inserted.

Содержание MDS-B5









































































































Результаты поиска

Содержание MDS-B5

Отзывы:

Похожие инструкции для MDS-B5

Бренды по названию

Популярные бренды

Sony MDS-B5, Руководство по эксплуатации

Результаты поиска

Содержание MDS-B5

Отзывы:

Похожие инструкции для MDS-B5

Бренды по названию

Популярные бренды