000
Chapter 2: Preparation: Connecting Devices
20
Connecting to a Network
Use the PC UI network connector on the rear of the unit to connect the PC UI computer.
For details on connections, see “Connecting a Computer for Settings Configuration” (page 22).
If you intend to use the Ustream service to stream, connect to the network using the STREAMING network
connector on the rear of the unit.
For details on network settings for streaming transmission, see “Configuring the Network Settings for Streaming Transmission”
(page 60).
Network hub
Internet
PC UI computer
Ustream service
Connecting the Power Supply
Connect the DC output plug of the supplied AC
adapter to the DC IN 12V connector on the rear of
the unit, and connect the AC adapter to a power
supply.
to power
supply
AC adapter
CAUTION
For safety, do not connect connectors for peripheral device
wiring that may have excessive voltage to the following
ports.
– PC UI network connector
– STREAMING network connector
Follow the instructions in this document for these ports.
CAUTION
When connecting the unit to a peripheral device via a LAN
cable, use a shielded-type cable to prevent malfunction due
to radiation noise.
